The TP-Link TL-WA901ND 450Mbps Wireless N Access Point is designed to establish or expand a scalable high-speed wireless N network, or to connect multiple Ethernet enabled devices - such as game consoles, digital media adapters, printers, or network attached storage devices to a wireless network. The AP supports a host of different functions that makes your wireless networking experience more flexible than ever before. You can now enjoy a better Internet experience when downloading, gaming, video streaming or with any other application that you may wish to use.
It supports AP Client, Bridge, Repeater and AP operation modes to enable various wireless applications to give a more dynamic and comprehensive experience when using your Access Point. Multiple operating mode also helps you easily build wireless network for hard-to-wire locations, or eliminating wireless dead zone.
The TL-WA901ND can be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This multiplies your options, allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.
450Mbps wireless transmission rate, brings smooth wireless N experience
Supports multiple operating modes: Access Point, Client, Universal/ WDS Repeater, Wireless Bridge
Easily setup a WPA-PSK/WPA2-PSK encrypted secure connection at a push of the WPS button
Up to 30 meters (100 feet) of flexible deployment with included Power over Ethernet Injector
Standards and Protocols - IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, Support Passive PoE
Interface - 1x 10/100M Ethernet Port (RJ45)
Button - WPS/Reset, Power On/Off
External Power Supply - 12VDC/1A
Dimensions (W X D X H) - 7.67x5.12x1.43 in.( 194.82x129.93x36.2mm)
Power Consumption - 5.8W
Antenna Type - 3x 5dBi Detachable Omni Directional (RP-SMA)