Ansmann PhotoCam III Battery Charger + 4x maxE AA 2100mAh

The Ansmann PhotoCam III comes complete with 4x maxE AA 2100mAh rechargeable batteries and can charge 2 or 4, AA or AAA batteries. The AA maxE battery has a capacity of 2100mAh and is delivered pre-charged with the very low self-discharge maxE characteristics. This means that it can be used in most applications even up to one year after charging.

This charger will not only fast charge fully discharged cells, but also top-up partially used cells back to full capacity. It has a fast, intelligent Charge - 500mA charge current. Charging is approximately 5 hours for 2100mAh cells when fully discharged, but proportionally lower depending on each battery's charge status. A microprocessor controller monitors each set of cells inserted. Suitable for NiMH or NiCd batteries. Comes with compact and lightweight UK plug top housing for 230V mains operation.

- For 2x/4x Micro AAA, Mignon AA
- Charging currents: Micro AAA 500mA, Mignon AA 500mA
- Charging time for Mignon 1000mAh is 2.4h
- Charging status indicator via LED
- Over charging protection by Delta peak detection and safety timer
- Faulty cell detection
- Alkaline insertion error detection
- Reverse connect protection
- Trickle charging
- Wide range input 100-240V AC
- Including 4x Mignon AA 2100mAh maxE
- Dimension: 120x68x72mm
- Weight: 280g
- 3 years warranty